POA-PN02
- Network Viewer Functions
Enables retrieval and auto-play of images from Ethernet-connected servers.
- Multi-Control Function
With the multi-control function, a single computer can be used to set up and control up to 100 projectors at the same time without the need for any special software or peripheral devices. The multi-control function is switchable between 3 levels: control, viewer, and control/viewer.
- E-mail Alert Function Sends Messages
With the E-mail Alert function, the PJ-Net Organizer Plus sends messages to registered E-mail addresses when an abnormality such as a lamp failure or power failure occur. Lamp-use time can also be used to automatically send messages to users and administrators as reminders regarding presentations and maintenance.
- Web Management
Using a Web browser you can check on the condition of the projector or adjust the controls in the following ways.
Projector status: lamp-use time, projector use time, in-store condition, power, input information
Projector controls: power (on/off), input mode, PC, system, image, and other settings
Saving/loading of settings: input mode, system, image and screen settings can be stored or loaded
- Automatic Timer ON/OFF Functions
- External Device Control Functions
- Control of Peripherals
PJ-Net Organizer Plus is equipped with an RS-232C serial communications port. This allows control of peripheral appliances that are similarly equipped with a serial port.*
*Serial port setting required.
Special driver software, etc., may be needed (not provided with the POA-PN02)
- PC Screen Upload and Project Function |
Example of POA-PN02 connection |
