PLC-XW300
  PLC-XW250
  PLC-XW200
  PLC-XE33

Feature
Main Features

Environment friendly power consumption in standby mode (Eco): 0.4W (100-120V) / 0.7W (200-240V)

SANYO's first ecological data projector with 0.4W (100-120V) / 0.7W (200-240W) standby power consumption *1, By redesigning electrical circuits, a standby power consumption savings of about 80% was achieved compared to a conventional model. These products conform with the EuP-Directive Lot6 *2, and the EU RoHS Directive *3

*1 When Standby mode: "Eco" is selected
*2 A directive of the EU that requires environmental design features for energy-using products (EuP)
*3 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations

'Easy Setup Function' enabling easy setup and operation even for novice users

'Auto Input Signal Search' function automatically performs the projector input settings
'Auto Vertical Keystone Correction' function*4 automatically eliminates vertical distortion.
'Guidance Function' displays connection instructions on the projection screen when no signal is detected, enabling easy setup even for the novice users

*4. Vertical keystone correction of ±30 degrees



Wired LAN (RJ-45) for projector control

This model is equipped with Wired LAN (RJ-45) that allows you to manage and control projector via Network. It is possible to check the operating time of lamp and manage the warning notification by Email. Power ON/OFF and switching of input signal can be controlled. You can save a lot of time about manage and control.


    *When using PJ Network Manager
Convenient Functions

Light Weight and Compactness for
Greater Portability

The compact design (333.5 x 85.2 x 247.0 mm (13.1 x 3.4 x 9.7 inch)*) and light weight body (2.5 kg (5.5 lbs)) let you make presentations almost anywhere.

*Not including protruding parts.

Direct off Function

The projector can be turned off by unplugging the cable without pressing the power button. You can pack up and leave quickly.

Two D-sub Terminals

The PLC-XW300/XW250/XW200/XE33 have two D-sub input terminals. One of these can be switched and used as a monitor output terminal.

Bright Images Even In a Well-Lit room

The PLC-XW300 provides outstanding brightness of 3,000 lumens, while the PLC-XW250/200/XE33 delivers 2,600/2,200/1,500 lumens of brightness.

Blackboad/Color Boad Mode

In addition to the black board (green) mode, the PLC-XW300/XW250/XW200/XE33 provides four color (red, blue, green, yellow) board modes, enabling easy projection* without using an ordinary screen.
* The projected image color may be different from input signal color.


[Other Features]

·Security: PIN code lock, Key lock